Stainless Steel Garden submersible pump (CSP250inox, 400inox, 550inox, 750inox, 900inox, 1100inox-C/D)

Operating Condition:
Fluid temperature up to 35 Centigrade;
Max ambient temperature 40 Centigrade.
Max particale: 30mm for dirty water type
Max particale: 5mm for clean water type

Structution:
1. Float switch for automatic pump operation.
2. Pump body made from stainless steel, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body.
3. Technopolymer open impeller or stainless steel impeller.
4. Suction strainer made from spccial plastic, providing the support base for the pump.
5. Technopolymer hose joint with screw fitting.
6. C45 steel motor shaft.
7. Double seal carbon/aluminum on the pump side and sealing ring on the motor side.
8. Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector).
9. Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself)
10. Protection rating IP 68
11. "H05/07 RN-F" Neoprene submersible supply cable.
13. Voltage and frequency available on request. 220V/50Hz, 220V/60Hz, single phase;
14. Copper wire stator with thermal protector;

Certification:
1. CE certificate
2. GS certificate

Application:
1. Household boosting, garden sprinkler, car washing
2. Pure water equipment washing
3. Non-flammable or non-explosive clear water without abrasive or fibre and not aggressive to stainless steel.